
Names on a glass, a pattern on a wooden coaster, initials on a metal tag. The fine diamond burrs follow your hand like a pen.
A rotary tool the size of a pen. Engrave a glass, sand a tiny edge, polish a ring or drill a small hole, with no cord in your way. One button, three speeds, charges by USB-C.
Pickup currently not available
Quick answers
| Size | 4.9 in / 12.5 cm |
| Bit shank | 2.35 mm (3/32 in) |
| Speeds | 3, one button |
| Power | 10 W |
| Battery | Built-in, 3.7 V rechargeable |
| Charging | USB-C (5 V) |
| Body | Aluminum alloy |
| Bit holder | 2 set screws + hex key |
From the feed
Pen-size rotary tools are a TikTok favorite for engraving and small crafts. Tap a clip for sound.
Detail work, made easy
Big rotary tools are heavy, loud and tied to a wall outlet. This one sits in your hand like a pen, so you can follow a line, reach a tight spot and work on the couch, at the desk or at the kitchen table.

What you can make

Names on a glass, a pattern on a wooden coaster, initials on a metal tag. The fine diamond burrs follow your hand like a pen.

Smooth a small carving with a sanding band, bring back the shine on a ring with a felt wheel, drill a tiny hole in a bead.
Works on
Best for light, precise work. Let the bit do the cutting: light pressure gives the cleanest line.
In the box
No extra purchase to make your first project. Every bit has the same 2.35 mm (3/32 in) shank.
The black zip case keeps the pen and every bit together, at home or on the go.

Controls
The pen starts on speed 1. Press once more from speed 1 to switch off.
Step up to speed 2 or 3. The blue dots show which one you're on.
You're pressing too hard: the motor pauses to protect itself. Ease off and carry on.
Show how much charge is left. When it's low, plug in any USB-C cable.
Tip: start on speed 1 for engraving and soft materials, go up for sanding and polishing.
Changing bits
Loosen the two small screws on the nose with the hex key.
Slide in a 2.35 mm (3/32 in) bit as far as it goes.
Tighten both screws a little at a time, evenly, so the bit spins straight.
Keep the hex key and the small screws in a safe spot: they're tiny.
Honest fit
It's a small motor in a pen-sized body: precise, quiet and easy to guide, not a replacement for a full-size rotary tool.

Before you start
Dust and tiny chips fly off the bit.
Clamp it or rest it on a non-slip mat.
If the red light comes on, ease off.
If the pen gets warm, let it cool before carrying on.
Never touch a spinning bit.
Store the pen and bits out of reach.
You have 30 days after delivery to return it. Free shipping on all US orders, secure checkout, and a real person at hello@tavirro.com who replies within 1 business day.
FAQ
Wood, glass, metal, jewelry, eggshell and stone are all shown by the maker. Start on speed 1 with a fine diamond burr and light pressure.
If your project is about detail (engraving, light sanding, polishing, small holes), yes. It isn't built to cut bolts, thick metal or to grind hard for a long time.
With the included USB cable, from any USB port or 5 V phone charger. It has a USB-C port and battery lights that show the charge left.
Yes, any bit with a 2.35 mm (3/32 in) shank. Bits with a 1/8 in (3.2 mm) shank are too thick.
That's the overload protection: when you press too hard, the red light comes on and the motor pauses. Lighten your pressure and it carries on.
It can get warm during long sessions. Take a short break and let it cool down.
Yes. A black zip carry case is included to store and carry the pen and its bits.
For anyone who likes crafts, models, jewelry or personalized gifts, it's a fun one: small, cordless, and ready to use with its kit.
7–12 business days, with free shipping on all US orders. You'll get a tracking link by email.
Yes, within 30 days after delivery. Write to hello@tavirro.com and we'll guide you.